Tempest TCU Project Portfolio
TEMPERATURE CONTROL UNITS
WE CUSTOM ENGINEER HOT WATER & OIL TEMPERATURE CONTROL UNITS
5-ZONE, 9kW HOT WATER TCU FOR INDUSTRIAL RUBBER TUBES
Design Temperature: 250°F
Heating Capacity: 9kW
Design Fluid: Water
Zones: 5
Operating Temps: 50F to 250F
Compressors: (2) Reciprocating
Electrical: NEMA 12 Enclosure
Controls: DIN Watlow EZ Zone Temp Indicating Controllers
2-ZONE STEAM HEATED TCU FOR TIRE MANUFACTURING
Design Temperature: 210°F (Steam Heated)
Design Fluid: Water
Design Pressure: 100 PSIG
Zones: 2
Operating Temps: 50F to 250F
Compressors: (2) Reciprocating
Electrical: NEMA 12 Enclosure – Indoor Duty
1-ZONE, 24kW TCU FOR RUBBER SHOE SOLE MANUFACTURING
Design Temperature: 250°F
Heating Capacity: 24kW
Design Fluid: Water
Design Pressure: 150 PSIG
Zones: 1
Pump: Close Coupled Centrifugal
Cooling Exchanger: Shell & Tube
Electrical: NEMA 12 Enclosure – Indoor Duty
DUAL ZONE STEAM HEATED TCM RATED FOR 1,750,000 BTUH
Zones: Two (2)
Design Temperature: 23°F to 250°F
Process Side Fluid: 50% Propylene Glycol
Steam Heat Exchanger: Shell & Tube
Heating Capacity: 1,750,000 BTUH
Pump: Close Coupled, End Suction, Centrifugal Pump
Electrical & Controls Enclosures: NEMA 4X Indoor Duty
Controls: Watlow Temperature Indicating Controller (TIC)
Dimensions: 9’L x 4’W x 7.5’H
SINGLE ZONE TCU, 2050kW @ 480-GPM
Pumps: Scot close coupled centrifugal type, cast iron casing and impeller Rated for 480 GPM @ 100′ TDH
Heat Exchanger: Rated for 7,019,138 BTU/hour using 45 PSI saturated steam
Bladder Expansion Tank: Amtrol Model ST-180C with 68 gallon capacity
Controls: Allen Bradley Compact Logix L1 PLC with 4″ Panelview Plus 7 4.3″ operator interface
Electrical: NEMA 12 Enclosure
13 TCUs – EACH 1-ZONES, 9kW – DESIGN TEMP 250F
Design Temperature: 250°F
Heating Capacity: 9kW
Design Fluid: Water
Zones: 1
Operating Temps: 50F to 250F
Electrical: NEMA 12 Enclosure
Dimensions: 46″L x 46″W x 60″H
Quantity of 4: Six (6) Zone TCUs (-40°F to 374°F)
Zones: 6
Temperature Control: Heating Capacity: – 40°F to 374°F
Design Fluid: Syltherm XLT
Design Pressure: 150 psig
Electrical: Class 1, Division 2, Group D
Pumps: Magnatex
Exchanger: SWEP Brazed Plate
4.5kW TCU PORTABLE MINI WITH ELECTRIC IMMERSION HEATER
Design Temperature: 210°F
Heating Capacity: 4.5kW
Design Fluid: Water
Dimensions: 24.5” X 11” X 26.5”
Weight: 160 LBS
Heater: Electric Immersion
Cooler: Brazed Plate Exchanger
Controls: Eurotherm 1/8 DIN Temp Indicating Controllers
ASPHALT APPLICATIONS
1-ZONE, 90kW HOT OIL TCU USING PARATHERM HE
Design Temperature: 450°F
Heating Capacity: 90kW
Design Fluid: Paratherm HE
Zones: One
Operating Temps: 120F to 450F
Design Pressure: 60 PSIG
Electrical: NEMA 4 Enclosure
Controls: DIN Temp Indicating Controllers
TCU EQUIPMENT PORTFOLIO
TCU CONFIGURATOR
HOT WATER UNITS
HOT OIL UNITS
PORTABLE MINI-TCUS
1-ZONE HOT OIL ASPHALT MIXING TCU
1-ZONE RUBBER SHOE SOLE TCU
2-ZONE TIRE MANUFACTURING TCU
5-ZONE RUBBER TUBE TCU
(13) 5-ZONE PHARMACEUTICAL TCUs
4.5kW PORTABLE MINI TCU
